{"product_id":"27-guyed-tower-kit-for-primus-wind-turbines","title":"Primus 27' Guyed Tower Kit For Wind Turbines","description":"\u003cp\u003eThe 27 Ft. (8.3 m) Tower Kit includes a tower clamp\/guy wire assembly and all necessary hardware and fasteners to erect a 27 Ft. tilt-up tower using Schedule 40 steel pipe or tubing with an outside diameter of 1.875\".\u003cbr\u003e \u003cbr\u003e Anchors and pipe or tubing are not furnished with the kit, so you have the flexibility to use the most appropriate components for the installation. \u003cbr\u003e This kit includes galvanized steel cable, not stainless steel cable.\u003cbr\u003e Fast Installation\u003cbr\u003e No Gin Pole ( for 27 Ft. only)\u003cbr\u003e No Winching\u003cbr\u003e No Cement Base\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e \u003cbr\u003e \u003cbr\u003e Base connector\u003cbr\u003e Lower wire set 160 ft. (49 m) pre-cut\u003cbr\u003e Base staples (2)\u003cbr\u003e 3\/8 in. x 1 ½ in. Bolts (2)\u003cbr\u003e 3\/8 in. Locknut (2)\u003cbr\u003e Cable thimbles (4)\u003cbr\u003e Cable clamps (8)\u003cbr\u003e  \u003cbr\u003e Pipe Needed (from suppliers) \u003cbr\u003e  \u003cbr\u003e 24 ft (7.2 m) length for tower\u003cbr\u003e 6 ft (1.8 m) length for tower base\u003cbr\u003e 1-7\/8 Steel Tubing\u003cbr\u003e  \u003cbr\u003e Pipe Requirements:\u003cbr\u003e  \u003cbr\u003e 1 7\/8 in. (47.5 mm) steel tubing\u003cbr\u003e  \u003cbr\u003e For pipe tube specifications please consider the wind speed resistance as the main mitigation factor in a relation tower height ( 27 Ft.) tube thickness and max win speed the tower will stand with no major impact on it.\u003cbr\u003e .065 can stand up to 90mph (40 m\/s) for a 27 Ft. tower\u003cbr\u003e .090 can stand up to 100mph (44 m\/s) for a 27 Ft. tower\u003cbr\u003e .145 can stand up to 120mph (53 m\/s) for a 27 Ft. tower\u003cbr\u003e Air Wind Turbine Sitting and Positioning\u003cbr\u003e \u003cbr\u003e The AIR wind turbine is designed to mount on tubing or pipe with a  nominal 1.875 – 1.900 inch outside diameter. This dimension enables  constructing a tower from a range of readily available materials including  1 1\/2 inch Schedule 40 steel pipe and 2 inch SS-20 galvanized fence  tubing (0.090 inch wall thickness). Under no circumstances should plastic  pipe be used to construct a tower. The manufacturer has few tower designed in different range as  27 ft (8.3 m) Tower, 29 ft (8.8 m) Tower and 45 ft (13.7 m) Tower\u003cbr\u003e  \u003cbr\u003e The minimum recommended tower height is 25 ft (7.6 m) on open ground or 20 ft (6 m) above nearby obstructions. Try to locate the wind turbine in the “cleanest” turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.\u003c\/p\u003e27' Guyed Tower Kit For Wind Turbines","brand":"Primus Wind Power","offers":[{"title":"Default Title","offer_id":46154775724228,"sku":"1-TWA-10-01","price":318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/3170\/0932\/files\/primus-wind-power-energy-default-title-27-guyed-tower-kit-for-primus-wind-turbines-11847936409697.jpg?v=1779017166","url":"https:\/\/25d.store\/products\/27-guyed-tower-kit-for-primus-wind-turbines","provider":"25D STORE","version":"1.0","type":"link"}